Converting a Grange Hall into a Home

A handsome building in desperate need of rescue provides an open-plan interior.
restored Greek Revival building

New windows were set in panels to mimic original proportions. Stacked stone steps topped with granite slabs replaced a concrete pad.

What’s now our home was built as a church ca. 1800, then converted to a grange hall in 1938. It had been abandoned for years, its upper windows boarded over, when we found it and decided to make it a residence. It had been gutted on the inside when we bought the building. But we restored the exterior to its Greek Revival splendor.

antique corner cupboard

The dining room’s cupboard is a re-production piece made to match a smaller antique in the entry area.

My wife, Wendy, and I have no children and have always wanted a house with an open floor plan. The old grange is so large that fully half the space has been left open to the second story. Original timbers give the walls definition. We’ve furnished it with a wide mix of early American reproductions (including artisan-made furniture and textiles), some choice antiques, and contemporary items. Wendy collects yellow ware and salt-glazed jugs.

grange interior with wood beams

Furnishings are practical and comfortable; a neutral sectional fits the scale of the grange interior.

On our previous old houses, we did most of the work ourselves. (We’ve restored five 18th-century homes as a hobby.) This job was so big we hired builder Tony Novak of Granville, Massachusetts. Because no plaster remained in the building (which had a tarp for a back wall and only half a floor when we bought it), we were able to add 8" of open-cell foam to the post-and-beam structure.

soapstone countertop

The unfitted kitchen mixes antiques with modern appliances; countertops were made by Green Mountain Soapstone.

When we closed on the house, its exterior was sheathed in vinyl siding. We discovered that the deep cornices and wood siding were still underneath, mostly in good condition. Framing revealed that the original windows spanned most of the two-story height on the sides of the house. To re-create the scale of the old windows, we asked our builder to create a framework consisting of long vertical panels that paralleled each stacked pair of windows, with a square panel between them. The result, we believe, is an elegant solution that maintains the proportions of the exterior.

temple-style Greek Revival building

Before: The temple-style Greek Revival building had been sheathed in vinyl and was long abandoned.

Related Articles

Products of the Week



Manufacturer of adhesives, wood consolidants, and wood replacement compounds for structural and decorative restoration.

abatron Mold Making and Casting Compounds

Mold Making & Casting Compounds

Founded in 1959, Abatron, Inc. specializes in the research, formulation, and manufacture of epoxy and related compounds.