Mold and mildew can grow in the damp places of your house. Some of the most commonly affected areas include your basement, attic, kitchen, bathroom, and any room with no ventilating window. Mold and mildew need to be removed with the help of specialized cleaners to keep your house safe and clean. Choosing to ignore mold and mildew can cause health complications and ruin the beauty of your home. Mold and mildew can be the reason behind allergies and breathing issues of those living in the house. What are you waiting for? If you see a mold or mildew in your house, it's time to remove it using the best mold and mildew remover. To help you out, we are going to list down the seven best mold and mildew removers in 2022 that you can buy.
Best Mold and Mildew Remover Worth Considering for 2022
The first mold and mildew remover on our list is from RMR-86. It comes in different concentrations that range from 32 Fl Oz to 320 Fl Oz. Furthermore, it is available in packs that contain one to four spray bottles, so you can pick one depending on your needs. It will also help you in getting rid of unwanted odors in your house. Plus, it comes in a ready-to-use spray form, and it does not require any scrubbing, making it very easy to use.
It can be used in the kitchen, drywall, toilet area, and vinyl shower curtains.
Directly targets the areas like grout lines, bathroom tiles, and the bottom of the sink to remove the stains of mildew and mold
This is a ready-to-use formula that needs no scrubbing
The next product on our list from STAR Brite. It is present in a concentration of 22 Fluid Ounces. The weight of the product is 1.7 pounds. Some of the active ingredients are Sodium, Water, Hypochlorite, N-methyl-N-(1-oxododecanoyl)- sodium salt. It is very easy to use; you can easily remove the stains without the need for heavy scrubbing.
It has a high-alkaline, triple-action formula for satisfactory results
It has chelating agents to lift ground-in dirt to provide you with the best results
It has a buffered-bleach technology that makes removing stains easier than you think
This mildew remover has the scent of lemon that makes it very pleasant to use. It has a weight of 2 pounds, and it is available in the form of a spray. It is a bleach-free spray cleaner that will help you in removing the stains caused due to the mildew and mold. Furthermore, it will also remove the stains that are left by hard water and minerals.
You can get rid of the stains present on the tubs, showers, tiles, shower curtains, and shower doors
You just have to rinse and wipe the surface after 5 minutes
To be used by homeowners, dormitory residents, or apartments
This mildew and mold stain remover is from CLR. It has a weight capacity of 3 pounds, and it is available in spray form. It is mostly recommended to be used on tiles. It is available in 32 Oz concentrations. You can get a value pack that contains 2 bottles to save some money. Also, it has a trigger spray handle for easy use.
You can use it for tiles, grout, fabrics, fiberglass, painted walls, and many other surfaces
The spray handle due to the trigger will allow you to spray the solution evenly on the surface
It is approved by the Environmental Protection Agency (EPA)
Results are slow, takes some time to remove stains
This product has a weight of 1.64 pounds. It is available in the form of spray, and it is available in 22 Fluid Ounces bottles. This product is going to help you quickly remove the mold and mildew stains without the need for constant scrubbing. It is very much easy to use. You can keep on spraying it until the stain disappears without any risk of damaging the surface.
It consists of a high-alkaline and triple-action formula
It will help in lifting ground-in dirt and will cut the grease and grime
It also has a buffered-bleach technology for best results
It is safe for marine, outdoor acrylic fabric, and outdoor upholstery
This product is available in a volume of one gallon. It is present in the form of liquid and has a weight of 4.24 kilograms. If you want less quantity, you can also get it in a volume of 128 Fl Oz. This product is specially made to handle the tough stains of mold and mildew. It uses a unique hybrid formula that has pure sodium hypochlorite to remove all the stubborn stains.
It is best for professional use. It is 5 times stronger than other stain removal products on the market
It has a fast-acting formula that is going to remove the stains from damp and dark places
It is safe to be used on multiple surfaces like an attic, brick walls, concrete floors, and much more
The last product on our list is from Tilex. It is available in the form of a spray. You can get this product in a volume of 32 Fl Oz. It has a weight of 2.2 pounds. You can get the value pack that contains 2 bottles. It is used to get rid of the mold and mildew without the need for aggressive scrubbing. This product is going to eliminate all the stains right in front of your eyes.
It kills 99.0% of the household’s mildew and mold
It is very easy to use and provides satisfactory results
It has an effective formula that eliminates mold and mildew stains easily
This product has a strong smell
Buying Guide for the Best Mold and Mildew Removers
Do you see a green or black patch on your wall, bathroom tile, inside your kitchen, or at any place in the basement? If yes, then this is definitely molded! It's time to take proper action to limit growth. Otherwise, it is going to ruin your entire property. Remember that mold and mildew growth occur mostly at damp places or places with no proper ventilation.
To remove the mold and mildew from your house, you definitely need mold and mildew remover of the finest quality. If you are planning to buy one of those, then the below buyer's guide is going to help you in the best way possible:
What are the causes of mold or mildew growth?
The answer to this question is present only in one word, and that is water! There are some other factors as well that will make mold or mildew grow easily. The conditions include light, nutrients, temperature, and a slightly acidic environment.
There will be some space in every house with poor ventilation like cabinets, attic, basement, and bathroom. It is best to use a dehumidifier and get rid of the humidity. Furthermore, you should also find a way to ventilate that area properly.
What if mold or mildew has grown? The only solution, in this case, will be the use of mold or mildew remover. You should visit the nearest home improvement store or shop online to buy the best remover possible. Choose a stain remover that doesn't need much scrubbing. Furthermore, you should check out the surfaces or areas on which you can use it for the best results.
What are the different types of mold?
Before you can start the treatment of mold on your own or with the help of professionals, you should be aware of the type of mold. This will help you to use the right mold or mildew remover to get the desired results. Let's have a look below to get adequate information about this:
This is going to affect the 20 to 30 percent of the population who are susceptible to mold allergens. In case of extreme infestation, you might have to call professionals for help. But most of the allergenic molds can be removed using home disinfecting products.
This mold is going to produce the poisonous chemicals known as mycotoxins. This can harm any living organism that includes animals and humans. They are quite deadly, and you need professional assistance to get rid of this mold and dispose of the affected materials properly to avoid problems.
This type of mold can cause disease and infection in young children and adults who have weak immune systems. The best way to control the small infestation is to control it with disinfectants. But if there are large colonies, then you have to call professionals for the treatment.
What are key considerations when buying mold and mildew removers?
When you are going to buy the mold and mildew remover, you should keep the following things in your mind:
It should be streak free
Most of the cleaners that you will get from the market are going to leave wiping marks known as streaks. It is important to make sure that the cleaner you are going to buy does not leave any marks.
It should be odor free
Most of the cleaners have a very strong smell like ammonia or give off dangerous fumes. It is important for you to check the ingredients carefully and buy one that is odor-free.
It should be safe
Make sure that the cleaner you are going to buy should be chemical-free. It should not damage the skin and surface that you are going to clean.
It should be neutral
Don't forget to check the pH of the cleaner. It is very much important for the safety of the surface that is going to be cleaned.
What are the tips to keep your home safe from mold and mildew?
Looking for tips to keep your house safe from mildew or mold? Have a look below:
Mold and mildew removers
One of the best things will be the mold and mildew removers to keep your house safe and clean. You can simply apply it to the affected surface to remove it. Furthermore, you can also try some home remedy alternatives like baking soda, vinegar, hydrogen peroxide, and bleach.
Use DIY mold test kit
A DIY mold test kit is not very expensive. It can be reliable, just like the professionals. You should use the kid in every area of your house to find out about mold growth.
Use air purifier
A HEPA air purifier will help you to filter out particles that are small in size of 0.3 microns. Note that the size of mold spores is also 1 to 30 microns, so a good air purifier will be very effective.
Mold and Mildew Remover FAQ
Q: How To Get Rid of Mold Permanently?
A: For this, you have to mix one part of bleach and four parts of water. Use a damp cloth to gently scrub the affected area and wipe the mold until it is properly removed. Once you are done, dry the area properly using a soft cloth.
Q: What Do Professionals Use To Kill Mold?
A: A well-known chemical called Concrobium Mold Control is used for killing mold. You can buy it from big-box hardware stores. It is used by professionals and homeowners to get rid of the mold. However, another effective product that you can use is hydrogen peroxide.
Q: Vinegar or Hydrogen Peroxide- Which One Is Better To Remove Mold?
A: Hydrogen peroxide is one of the household ingredients that is used for cleaning mold. You can also use vinegar as an effective cleaning product. But remember, do not mix vinegar and hydrogen peroxide together to remove mold.
The Old House Journal Review Team’s product reviews and in-depth guides are here to help you restore, repair, update, and decorate your home. The content is created by The Old House Journal Review Team. The Old House Journal editorial staff is not involved. Old House Journal is reader-supported: When you buy through links on our site, we may earn an affiliate commission.